The electric furnace of the cup lid forming machine is divided into two sections: preheating and heating; the forming heating plate is automatically closed and opened, and the start-up can be delayed after the heating plate is put down to limit the waste of materials within one stroke.
The mold of the cup lid forming machine is clamped by pressing plate, which is convenient for adjustment and installation.
Due to the use of body-fitting heating, the heating power and temperature are reduced, energy is saved and the stability of the plastic sheet is enhanced.
The cup lid forming machine uses fully automatic process operation, advanced technology, safe and easy operation.
The mechanical transmission adopts the reducer to connect with the main shaft, and the main shaft is on the same axis line to reduce the transmission error.Using the manipulator to clamp the feeding mechanism, the operation is stable, the synchronization is accurate, and the stroke can be adjusted arbitrarily from 150-230mm.
Advanced Gear Box Mechanism.
Excellent steel frame mechanism , Stable Transmission System, Gears and cams control the movement, (keep machine stable),
Automatic oil system , keep the machine long time working without stop.
Intelligent design, PLC (computer) control system, servo motor.
Advanced hot air system.
Safe Alarm System, Automatic fault detect, alarm and stop.
All parts made in Standardized production, easy exchange/replace, easy maintenance.
|Paper material||150-350gsm(polyethylene coated paper)|
|Power requirements||220V 380V 50HZ|
|Shape size||L2100 *W1000*W1800mm|
Main Equipment List:
|Contactor||Korea-LS||Main motor||Tokugawa Tsunanobu|
|Air Medallion||Korea-LS||Knurling motor||Tokugawa Tsunanobu|
|The Bottom Paper feeding servo motor||Taiwan-Delt a||
|Japan--Omr on||Hot air welding device||Switzerland-Lister|
|Solenoid valves/ Mechanical Valve||
|Contact Person :||Mr.lin|